MicroconcreteThese are an ready to use non shrink concrete with flowable cosistancy. It can be used to repair and strengthen RC element such as columns, beams, slabs etc. For special repair jobs, polymer modified high strength microconcrete & epoxy resin based mortar is also available.
Top Products: Fosroc RG(L) - General purpose, non-shrink, cementitious microconcrete Dr. Fixit Microconcrete - Flowable Mortar for repairs to damaged reinforced concrete members For any further inquiry relating to Microconcrete CONTACT US Rust ConvertorsAfter removal of rusty scales mechanically from reinforcement, the rust convertor is applied with brush, which removes the inherent rust & converts into temporary anticorrosive base coat.
Sika Rustoff - 100 - Rust Remover cum passivator Dr. Fixit Rust Remover - Liquid for cleaning re-bars & steel surfaces For any further inquiry relating to Rust Convertors CONTACT US Anti-Corrosive Coat for ReinforcementZinch rich epoxy primer or polymeric cementitious coating is applied by brush.
Sika Rustop - An anti corrosive coating for steel and concrete For any further inquiry relating to Anti Corrosive Coatings contact us Bonding Agent for ConcreteThe water based polymers mixed with cement (Bonding coat) & applied on reinforcement and periphery concrete on which the polymer admixed mortar is pressed by hand before the bonding coat dries out. After reinforce is covered with hand patched polymer admixed cement, sand mortar. It is exposed to air curing for minimum 24 hrs. Same process is carried out to cover rest of the debonded concrete. In some cases epoxy bonding agent is also used where the load factor is important
For any further inquiry relating to Bonding Agent CONTACT US Click here for a Step by step guidance to perform RCC Repair |
